请选择 进入手机版 | 继续访问电脑版

iKuai爱快流控路由

 找回密码
 立即注册

QQ登录

只需一步,快速开始

查看: 1462|回复: 1

爱快3.6 不支持57810 NPAR网卡

[复制链接]
发表于 2022-1-14 21:02:38 | 显示全部楼层 |阅读模式
57810 支持采用npar虚拟化网卡,但是最新的爱快认不到这个网卡是怎么回事?
一下是pve中bnx2x驱动显示的网卡信息。

01:00.0 Ethernet controller: Broadcom Limited NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function (rev 10)
        Subsystem: Broadcom Limited NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at 4008800000 (64-bit, prefetchable) [size=8M]
        Region 2: Memory at 4009000000 (64-bit, prefetchable) [size=8M]
        Region 4: Memory at 4008400000 (64-bit, prefetchable) [size=64K]
        Expansion ROM at a1480000 [disabled] [size=512K]
        Capabilities: [48] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [50] Vital Product Data
                Product Name: QLogic 57810 10 Gigabit Ethernet
                Read-only fields:
                        [PN] Part number: BCM957810
                        [MN] Manufacture ID: 31 30 32 38
                        [V0] Vendor specific: FFV15.15.08
                        [V1] Vendor specific: 333333.VER1.0
                        [V2] Vendor specific: NPY2
                        [V3] Vendor specific: PMT12678
                        [V4] Vendor specific: NMVQLogic
                        [V5] Vendor specific: DTINIC
                        [V6] Vendor specific: ******************
                        [RV] Reserved: checksum good, 178 byte(s) reserved
                End
        Capabilities: [a0] MSI-X: Enable- Count=17 Masked-
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00001000
        Capabilities: [ac] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 75.000W
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr+ NoSnoop+ FLReset-
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s <1us, L1 <2us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [13c v1] Device Serial Number ****************
        Capabilities: [150 v1] Power Budgeting <?>
        Capabilities: [160 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [1b8 v1] Alternative Routing-ID Interpretation (ARI)
                ARICap: MFVC- ACS-, Next Function: 1
                ARICtl: MFVC- ACS-, Function Group: 0
        Capabilities: [1c0 v1] Single Root I/O Virtualization (SR-IOV)
                IOVCap: Migration-, Interrupt Message Number: 000
                IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
                IOVSta: Migration-
                Initial VFs: 16, Total VFs: 16, Number of VFs: 0, Function Dependency Link: 00
                VF offset: 8, stride: 1, Device ID: 16af
                Supported Page Size: 000005ff, System Page Size: 00000001
                Region 0: Memory at 0000004008480000 (64-bit, prefetchable)
                Region 4: Memory at 0000004010880000 (64-bit, prefetchable)
                VF Migration: offset: 00000000, BIR: 0
        Capabilities: [220 v1] #15
        Capabilities: [300 v1] #19
        Kernel driver in use: vfio-pci
        Kernel modules: bnx2x


 楼主| 发表于 2022-1-22 19:17:29 | 显示全部楼层
不处理吗?
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|小黑屋|手机版|Archiver|论坛规章制度|iKuai Inc. ( 京ICP备13042604号 )

GMT+8, 2024-3-29 01:36

Powered by Discuz! X3.3

© 2001-2024 Comsenz Inc.

快速回复 返回顶部 返回列表