爱快itv使用lan口 如何扩展

8683586

爱快itv官方教程实际使用环境 IPTV口使用lan口 鉴于运营商限制端口 流量 一般一个口出8个频道 我有10条运营商的iptv 如何用交换机扩展lan出80个频道 谢谢

爱快技术支持09

使用LAN口加vlan的方式来实现。
如LAN2口接交换机，先在LAN2里面划分好各个vlan ID。再去交换机上设置每个端口的vlan。最后连接到路由的接口设置为trunk。

8683586

我就是这样设置的 只能播放一个 我在试试

8683586

version 7.1.070, Release 6113
#
sysname H3C
#
telnet server enable
#
irf mac-address persistent timer
irf auto-update enable
undo irf link-delay
irf member 1 priority 1
#
lldp global enable
#
password-recovery enable
#
vlan 1
#
vlan 2 to 30
#
stp global enable
#
interface NULL0
#              
interface Vlan-interface1
ip address 192.168.1.253 255.255.255.0
#
interface GigabitEthernet1/0/1
#
interface GigabitEthernet1/0/2
port access vlan 2
#
interface GigabitEthernet1/0/3
port access vlan 3
#
interface GigabitEthernet1/0/4
port access vlan 4
#
interface GigabitEthernet1/0/5
port access vlan 5
#
interface GigabitEthernet1/0/6
port access vlan 6
#
interface GigabitEthernet1/0/7
port access vlan 7
#              
interface GigabitEthernet1/0/8
port access vlan 8
#
interface GigabitEthernet1/0/9
port access vlan 9
#
interface GigabitEthernet1/0/10
port access vlan 10

#
interface GigabitEthernet1/0/23
port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan all
#
interface GigabitEthernet1/0/24
port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 2 to 30
#
interface Ten-GigabitEthernet1/0/25
#
interface Ten-GigabitEthernet1/0/26
#
interface Ten-GigabitEthernet1/0/27
#
interface Ten-GigabitEthernet1/0/28
#
scheduler logfile size 16
#
line class aux
user-role network-admin
#
line class vty
user-role network-operator
#
line aux 0
user-role network-admin
#
line vty 0 63
authentication-mode scheme
user-role network-operator
#
radius scheme system
user-name-format without-domain
#              
domain system
#
domain default enable system
#
role name level-0
description Predefined level-0 role
#
role name level-1
description Predefined level-1 role
#
role name level-2
description Predefined level-2 role
#
role name level-3
description Predefined level-3 role
#
role name level-4
description Predefined level-4 role
#
role name level-5
description Predefined level-5 role
#
role name level-6
description Predefined level-6 role
#
role name level-7
description Predefined level-7 role
#
role name level-8
description Predefined level-8 role
#
role name level-9
description Predefined level-9 role
#
role name level-10
description Predefined level-10 role
#
role name level-11
description Predefined level-11 role
#
role name level-12
description Predefined level-12 role
#
role name level-13
description Predefined level-13 role
#              
role name level-14
description Predefined level-14 role
#
user-group system
#
local-user admin class manage
password hash $h$6$uaJTWUV0GL8njsNR$0djeSl3AZKgRRaeqznazzocyMyEBkx5XYU8m2+od13EPYm4+uRNaw7yrX3c/k7PBb3VXDYtW1OP/o1ehDDhXVA==
service-type telnet http https
authorization-attribute user-role level-15
authorization-attribute user-role network-admin
authorization-attribute user-role network-operator
#
ip http enable
ip https enable
#
return

8683586

爱快技术支持09 发表于 2022-2-7 14:56
使用LAN口加vlan的方式来实现。
如LAN2口接交换机，先在LAN2里面划分好各个vlan ID。再去交换机上设置每个 ...

只能一个口使用

8683586

我再顶一下

8683586

按 使用LAN口加vlan的方式来实现。 如LAN2口接交换机，先在LAN2里面划分好各个vlan ID。再去交换机上设置每个端口的vlan。最后连接到路由的接口设置为trunk。不能实现

8683586

爱快技术支持09 发表于 2022-2-7 14:56
使用LAN口加vlan的方式来实现。
如LAN2口接交换机，先在LAN2里面划分好各个vlan ID。再去交换机上设置每个 ...

有客服指导一下吗谢谢

8683586

有客服指导吗 二楼的我测试了 不能实现 谢谢二楼

8683586

请大神指点一下